JCB S1530E

To use any kind of Static Boom lift you need the appropriate training. We run IPAF 1b training courses at all of our depots that will instruct an operator how to prepare and safely operate any type of Static Boom lift. 

A Static boom is any boom which requires outriggers, jacks or stabilisers to be deployed before elevating. This type (1b) of mobile elevating work platform (MEWP) cannot be moved along the ground when elevated. They are able to be driven, towed or pushed into position.

IPAF’s MEWP Operator Training is certified by TÜV as conforming to the international standard ISO 18878 Mobile elevating work platforms – Operator (driver) training.

More information on Operator training can be found here.

DOWNLOADS  

Training Course Brochure

All electric powered access platforms require charging each night in order to get a full day’s work out of them. These 110v transformers are ideal for bringing the voltage down from 240v to 110v allowing the charger unit to be plugged into a standard power source. All our machines are delivered fully charged.

DOWNLOADS  

GTA Accessories Leaflet

?? Did you know we also hire trailers alongside your machine hire? ??

Trailer hire gives you the freedom to move from job to job at your own convenience.

To use any kind of self propelled scissor lift you need the appropriate training. We run IPAF 3a training courses at all of our depots that will instruct an operator how to prepare and safely operate any type of scissor lift. Completing this training will also permit a user to operate PAVs (Push Around Verticals).

A 3a machine is classified as any machine with a scissor, sigma or vertical mast lift mechanism.

IPAF’s MEWP Operator Training is certified by TÜV as conforming to the international standard ISO 18878 Mobile elevating work platforms – Operator (driver) training.

More information on Operator training can be found here.

DOWNLOADS  

Training Course Brochure

To use any kind of mobile Boom lift you need the appropriate training. We run IPAF 3b training courses at all of our depots that will instruct an operator how to prepare and safely operate any type of mobile Boom lift. 

Self-propelled booms which can be driven when elevated. The 3b category includes articulated booms (which give 'up-and-over' outreach), and telescopic booms (which give 'line-of-sight' outreach). 

IPAF’s MEWP Operator Training is certified by TÜV as conforming to the international standard ISO 18878 Mobile elevating work platforms – Operator (driver) training.

More information on Operator training can be found here.

DOWNLOADS  

Training Course Brochure

All electric powered access platforms require charging each night in order to get a full day’s work out of them. These 110v transformers are ideal for bringing the voltage down from 240v to 110v allowing the charger unit to be plugged into a standard power source. All our machines are delivered fully charged.

DOWNLOADS  

GTA Accessories Leaflet

These tough, connectable and man-handleable road mats provide essential temporary access and ground protection on soft or sensitive ground. Ground mats can remove the need for costly reinstatement once the project is complete.

• Fast and easy to install using 2 or 4 way connectors
• Supports loads up to 80 tonnes
• Lightweight 35kg mats make handling easy
• Unique Chevron Traction surface for superior grip and reduced slippage
• Environmentally friendly 100% recycled HDPE
• Ideal for usage over soft or sensitive ground 

DOWNLOADS  

Ground Guards Leaflet

IPAF Ground Assessment Guidance Document

Access Platforms are expensive pieces of equipment, to replace or repair. Should the rental equipment be damaged you would be liable for any repair costs under the CPA Terms and Conditions. Your Hired In Plant insurance may cover you for accidental damage to the hire equipment. However, if you prefer or are not covered on your own insurance we can cover you with our GTA Damage Waiver.

Please Note: GTA Damage Waiver is in addition to being covered by your own 'Hired in Plant' Insurance. GTA All Risk will automatically be added unless a valid copy of your ‘Hired in Plant’ insurance has been provided.

GTA Secure™ is a simple and effective system that puts you in control.

• Track all your hired in access platforms anytime, anywhere.
• Create virtual geo-fences around your jobsite.
• Enforce safety by controlling who's allowed to use the machine.
• Real-time machine monitoring, who, what and for how long.

DOWNLOADS  

GTA Secure™ Leaflet

This range extender diesel engine lifts on to the Haulotte HS18 E scissor lift turning the elictric scissor in to a hybrid scissor lift that can be 'First In, Last Out' on construction sites.

removable and interchangeable range extender to rapidly recharge the batteries while the machine remains fully operational. One range extender can be used on different HS15 E or HS18 E.

Using a single machine throughout the life of a project guarantees availability while reducing transportation costs.

Remove the risk of falls from an elevated work platform with a shortened lanyard. Suitable as a spare or replacement lanyard to go with our double point harnesses.

• 2m Adjustable Webbing Lanyard
• Includes Karabiners EN 358:2000
• Screwgate Carabiner EN 362

Designed with the best features for an industrial quality helmet for work at height and general site safety. Built to mountain engineering certification, the Multi Pro helmet is built to last and has provision for all the standard accessory types that are needed on the job.

• Impact and penetration protection meets and exceeds AS/NZS 1801
• Fully detachable and washable inner lining
• 10 air intakes for breathability, vents mesh to prevent debris entry
• Fixing points for half face visor and ear defenders
• Non releasing chin strap so helmet stays in position during a fall
• 5 year lifespan

With an online MyGTA™ account you can manage your powered access hires anytime, anywhere, all at your convenience. See what’s on hire, request off-hires, and view your statements and invoices all in one location.

Protect floors from potential oil and hydraulic drips when operating powered access platforms with the use of a Nappy or Drip Diaper.  These are available to buy and can be delivered direct to site with your hired powered access platform (MEWP). These are available for all Scissor and boom machines.

• Powered access platform nappies can be supplied for a specific model of machine or can be supplied as a standard size.
• Nappies are made from durable PVC which can be washed down after use and re-used again.

The area of the foot attached to an outrigger of a MEWP is often relatively small and consequently generates high pressures directly on the ground.

Most soils, unmade ground and some paved and tarmac covered areas are not capable of supporting these pressures.  Some form of foundation or suitable spreader pad is often necessary to reduce these pressures to an acceptable safe level.

DOWNLOADS  

GTA Accessories Leaflet

IPAF Spreader Plate Best Practice

IPAF Ground Assessment Guidance Document

A durable and lightweight back pack that is the perfect accessory for keeping your harness, lanyard and associated equipment together.

• Keeps all your gear together
• Lightweight

General purpose Double point harness with front and rear D ring attachment points, Eze-Klick Quick connect buckles and high comfort webbing. Simple and effective fall arrest harness for total safety compliance. EN 361:2002. All harnesses have a 10 year life span (unless failed safety check/inspection).

All harnesses are suppled with a 2m Adjustable Webbing Lanyard (Karabiners not included) EN 358:2000. Screwgate Carabiner EN 362.

Available either as 3.3kVA or 5kVA

All electric powered access platforms require charging each night in order to get a full day’s work out of them. These 110v transformers are ideal for bringing the voltage down from 240v to 110v allowing the charger unit to be plugged into a standard power source. All our machines are delivered fully charged.

DOWNLOADS  

GTA Accessories Leaflet

Wheel covers are ideal for both indoor and outdoor use when you need to protect a finished floor surface from unsightly black marks caused by the tyres of a machine. These wheel covers are supplied as a set of 4 and come in various sizes to suit individual machines. These can be purchased and supplied with your hire machine and are particularly useful when non-marking tyres are not an option. Wheel covers are simple to fit and can be reused multiple times.